How To Install Ez Pass Transponder Md

Windshield Mountain

Make clean and dry out the inside of your windshield around the rearview mirror.
Identify the front face of your Eastward-ZPass tag (it volition take the label with the Maine Turnpike Logo and the tag serial number). This side faces the interior of the vehicle with the arrows on the tag pointing toward the roof.
Locate the correct position for the tag — the upper eye portion of your windshield backside the rearview mirror, at least ane inch to the correct of the mirror and at least i inch below the pinnacle edge of the windshield. If your vehicle has tinted glass, make certain the device is at least ane inch below the tinted section of drinking glass.
There are 4 adhesive strips: 2 are permanently mounted to the tag, and 2 are for mounting to the windshield. Without removing the 2nd set of adhesive strips from the tag, carefully remove the protective backing from the mounting strips on the rear of the tag.
Turn the tag correct side upward facing you lot. Place the tag in the right position and press firmly against the glass for fifteen seconds to reach a expert bond.
Your Eastward-ZPass tag may exist removed by gently lifting one corner of the tag to separate the adhesive strips.
Please note: Do not endeavor to remove the mounting strips from your windshield and reuse them. An extra prepare of mounting strips was provided with your E-ZPass order. You may order additional mounting strips by calling E-ZPass Client Service at i-888-MTA-Laissez passer (i-888-682-7277), Monday through Friday, viii:00 AM to six:00 PM

License Plate Mountain

Identify the flat side of your E-ZPass tag. It will take the sticker with the Maine Turnpike Logo. This side should face inward to your vehicle.
Fasten your E-ZPass tag to the front license plate using the existing top mounting bolts and the knock-out holes at the bottom of the E-ZPass tag, so you do not comprehend the state name on your license plate. Tighten the bolts securely, but do not over tighten.
Delight annotation: Your East-ZPass license plate tag should be fastened to the center of the front bumper, fifty-fifty if your license plate is in a dissimilar location.

Roof Mount

Locate the right installation position for your E-ZPass roof-mount tag. It should be on the roof of the vehicle, on the centerline a minimum of 3" from the front of the cab roof.

Exercise not install the tag:
- inside 2' of whatsoever radio transmitting antennas;
- on the sloping surface of a cab or roof — the bottom of the tag associates must be parallel to the road;
- behind horns, lights or other metallic objects;
- within 1' of whatever trailers or other metal objects.
A plastic or fiberglass air dam or spoiler may encompass the East-ZPass tag, provided the cover does not have any metallic paint or metal foil decals on it.
Bolt the E-ZPass tag to the cab roof securely.