How To Install Intel 750 Ssd

The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

Safari
Chrome
Edge
Firefox

Concrete Installation Instructions for Intel® Solid Land Drive 750 Series

Documentation

Content Type Install & Setup

Article ID 000005956

Terminal Reviewed 05/06/2020

See the instructions beneath for how to install the Intel® Solid Country Drive 750 Series hardware. For compatibility with NVM Express* (NVMe*), utilize with a organization based on an Intel® Z97 Chipset, Intel® X99 Chipset, or later chipset.

Before you begin

Caution

Caution icon

Disconnect the desktop lath'south power supply from its AC ability source before you connect or disconnect cables, or install or remove any board components.

Without first disconnecting the ability supply, you lot risk personal injury or equipment impairment.

Some circuitry on the desktop board tin operate even if the front console power switch is off.

Electrostatic discharge (ESD) can impairment desktop lath components. Install the board at an ESD-controlled workstation. If an ESD-controlled workstation is unavailable, wear an anti-static wrist strap or touch the surface of the anti-static package before handling the board.

Prepare

Your lath may accept multiple PCIe* slots. The PCIe SSD needs a PCI Express* (PCIe) x4 connector. All-time operation is with a PCIe 3.0 connector.

PCIe* slots Z87

In our example:

Install the PCIe SSD in connector A, C, or F.
We recommend the connector closest to the processor/CPU (F) for all-time functioning.
If you detect issues, the connector farthest from the CPU (A) might be more than successful.
If yous are using a third-party (add-in bill of fare) video card, place information technology in the PCIe connector closest to CPU (F).

Installation steps for Intel® SSD 750 Series Add together-in Card (AIC)

Detect the proper PCIe iii.0 connector. Remove the screw and shield from your chassis.
Adhere the SSD to the proper size I/O shield for your chassis. The half-acme shield is in the box packaging.
Insert the SSD.
Replace the chassis screw in the shield to hold the SSD in place.

Come across your chassis transmission for more detailed instructions.

SSD 750 series

Installation steps for the Intel® SSD 750 Series 2.v-inch drive

Mount the SSD in the chassis using screws to hold the SSD securely.
Connect the cable from the SSD (SFF 8639) to the motherboard connector (SFF 8643).
Connect SATA ability to the connector on the cable.

Run across your chassis transmission for more detailed instructions.

Notation

Make sure the electric connection to the mini-SAS HD connector is PCIe, non SAS or SATA. NVMe SSDs only support PCI Express* signals.

The SFF 8643 connector is also chosen a mini-SAS HD connector.
The SFF 8639 may as well be chosen a SATA-express* drive connector with more signals.